您的当前位置:首页正文

玻璃管和钢管对比

2022-06-15 来源:知库网


Longer life使用寿命长

To 30-50 years可达30-50年。

Better anti-frozen capability抗冻性能好 Premium anti-frozen capability优异的抗冻性能,

No-frozen below -40℃在零下40℃以下不冻裂。

Small injection pressure注水压力小

 Smooth inside surface, no fouling or

wax, small friction内壁光滑,不易结垢结蜡,摩阻阻力小。

 GRE Absolute roughness-0.5mm;

SMLS Absolute roughness-2.3mm. Under same & flow rate, OD of GRE can be 1-2 lever lower than SMLS 玻璃钢管的绝对粗糙率为0.05 mm;无缝钢管的绝对粗糙率为2.3 mm。在输送功率和流量相同的情况下,选用玻璃钢管,其管道直径可比钢管缩小1-2个管径等级。

Lower maintenance costs维护费用低

 Free maintenance for non-outer

damage非外力致损,免维护。

Lower mass质量轻

 Lower transportation & installation

coasts运输、安装费用低。

Weight of GRE is forth of that of Steel Pipe and need no welder or heavy lifting quipment. 玻璃钢管的重量只有钢管的1/4,且不需电焊机及重型吊装设备。

Low thermal conductivity导热系数低

 No heat insulation material under

non-tough conditions

非恶劣条件不需增加保温材料。

Premium insulating capability绝缘性能优良

 Not be influenced by complicated

geographic conditions 不受复杂地理条件影响。

Environment- friendly 环保

 Environment- friendly raw material,

energy-efficient during manufacturing, no second-contamination and no

leakage in application.

原料绿色环保,生产过程节能降耗,使用过程无二次污染、无泄露。

Short life使用寿命短

To 5-10 years 一般5-10年

Bad anti-frozen capability抗冻性能差 Prone to freezing under low temperature 低温容易冻裂。

High injection pressure注水压力大

 Rough inside surface, more waxing

and friction内壁较粗糙,结垢结蜡,摩阻阻力大;

 In long term, wall corrosion leads to

ID shrinking and form rust particles in water, producing block/jam

长期运行,管壁锈蚀导致内径缩小,同时水中出现铁锈颗粒,造成岩层堵塞。

High maintenance costs维护费用高

 Need external coating, cathodic

protection, and regular replacement of sacrifice anode. When the coating is damaged, punching rate will be higher. Welding line radiation inspection, multi lines leading increasing maintenance costs year by year.

需要外加防腐涂料、阴极保护、定期更换牺牲阳极。防腐层老化破损后,穿孔率较高。需放射线焊口探伤,焊缝多,维护费用逐年增大。

Heavy mass质量重

 Higher transportation & installation

coasts, need heavy equipment for installation运输、安装费用高,安装需大型设备。

High thermal conductivity导热系数高

 Big heat loss, need more heat

insulation material热流失大,需增加保温材料。

Bad insulating capability 绝缘性能差

 Good conductor of electricity, nor fir

for electricity transportation and areas

with dense wires and thunders and lightings

电的良导体,不利于应用于输电、电信线路密集区和多雷区。

High energy use and contamination高耗能、高污染

 High energy consumption in

manufacturing, transportation and installation, with second contamination and prone to leakages. 生产、运输、安装过程高能耗,使用过程存在二次污染,原油泄露时造成环境污染。

因篇幅问题不能全部显示,请点此查看更多更全内容