再求大神翻译

发布网友发布时间：2022-04-22 05:28

共5个回答

热心网友时间：2023-08-25 01:16

According to the traditional light detection system of the show drab, through the data nodes CAN light switch quantity collection of cars, making beautiful, efficient LabvIEW virtual instrument analysis and said. This paper used the USBCAN-ZhouLiGong guangzhou company Ⅰ type CAN intelligence interface card receive CAN-BUS BUS data, intelligent computer CAN connect to become computer interface card CAN node. Use of software development language made light LabVIEW detection system. LabVIEW through the DLL receiving a CAN bus in the car of the light switch quantity, and making virtual instrument shows car light corresponding state, and the car light state of the test. The results show that the test results CAN bus logic is' 0 \", that is, the \"dominant\". CAN bus transceiver and bus between two interface pin, signal to two line between \"difference\" voltage form. With more than a dominant minimum value of the difference between voltage said. Contrast analysis of data and light detection system based on LabVIEW car shown FIG, test results and actual data input the tally. The results show that good stability testing system, can effective for car light for testing
针对传统汽车灯光检测系统单调的显示，通过对CAN数据节点汽车灯光开关量的采集，制作美观、高效的LabvIEW虚拟仪表进行分析与表示。该文使用广州周立功公司的USBCAN-Ⅰ型CAN智能接口卡接收CAN-BUS总线数据，CAN智能接口卡连接电脑使计算机成为CAN节点。使用软件开发语言LabVIEW制作灯光检测系统。LabVIEW通过动态链接库接收CAN总线中汽车灯光的开关量，并制作虚拟仪表显示汽车灯光相应状态，从而对汽车灯光的状态进行检测。结果表明，测试结果CAN总线的逻辑值为“0”即“显性”。CAN总线收发器与总线之间的两接口引脚，信号以两线之间的“差分”电压形式出现。显性位以大于最小间值的差分电压表示。对比数据的分析与基于LabVIEW汽车灯光检测系统显示图，结果测试所得情况与实际数据输入相符。结果表明,检测系统稳定性好,可以有效的对汽车灯光进行检测。

希望满意

热心网友时间：2023-08-25 01:17

In view of the traditional automobile light detection system flat display, through to the CAN data node auto light switch quantity collection, making beautiful, efficient LabvIEW virtual instrument for analysis and presentation of. In this paper, using the Guangzhou ZLG USBCAN-ⅠCAN intelligent interface card of CAN-BUS bus data received, CAN intelligent interface card connected to the computer so that the computer becomes a CAN node. The use of software development language LabVIEW making light detection system. LabVIEW through the dynamic link library receives the CAN bus automobile light switch, and make the virtual instrument display state corresponding to car lights, car lights state testing. The results show that, the test results of CAN bus logic value of "0" or " dominant". CAN Bus Transceiver with bus between the two interface pins, signal to two line between the" difference" voltage form. The dominant position with greater than the minimum value of the differential voltage between said. A comparative data analysis based on LabVIEW automobile light detection system is shown in fig, results from testing situation and the actual data input. The results show that detection system, good stability, can be effective for automobile light detection.

热心网友时间：2023-08-25 01:18

针对传统汽车灯光检测系统单调的显示，通过对CAN数据节点汽车灯光开关量的采集，制作美观、高效的LabvIEW虚拟仪表进行分析与表示。该文使用广州周立功公司的USBCAN-Ⅰ型CAN智能接口卡接收CAN-BUS总线数据，CAN智能接口卡连接电脑使计算机成为CAN节点。使用软件开发语言LabVIEW制作灯光检测系统。LabVIEW通过动态链接库接收CAN总线中汽车灯光的开关量，并制作虚拟仪表显示汽车灯光相应状态，从而对汽车灯光的状态进行检测。结果表明，测试结果CAN总线的逻辑值为“0”即“显性”。CAN总线收发器与总线之间的两接口引脚，信号以两线之间的“差分”电压形式出现。显性位以大于最小间值的差分电压表示。对比数据的分析与基于LabVIEW汽车灯光检测系统显示图，结果测试所得情况与实际数据输入相符。结果表明,检测系统稳定性好,可以有效的对汽车灯光进行检测

热心网友时间：2023-08-25 01:19

雨艺下的天明回答的对来自：求助得到的回答

全部栏目

再求大神翻译